7 Application Instructions API 50-99 X0 M1029 Y10 0.5ms Y0 output 1ms Remarks: 1. Flags and special registers for ES/EX/SS series MPU: M1010: When On, Y0 output will be continuous with no limitation on the number of pulses. When Off, the number of output pulses from Y0 will be decided by S 2 . M1023: When On, Y1 output will be continuous with no limitation on the number of pulses. When Off, the number of output pulses from Y1 will be decided by S 2 . M1029: On when Y0 pulse output is completed. M1030: On when Y1 pulse output is completed. M1078: Y0 output pauses. M1079: Y1 output pauses. D1030: Low word of the current number of output pulses from Y0 D1031:
High word of the current number of output pulses from Y0 D1032: Low word of the current number of output pulses from Y1 D1033: High word of the current number of output pulses from Y1 2. Flags and special registers for SA/SX/SC series MPU: M1010: (SA/SX/SC) When On, Y0 output will be continuous with no limitation on the number of pulses. When Off, the number of output pulses from Y0 will be decided by S 2 . M1023: (SA/SX/SC) When On, Y1 output will be continuous with no limitation on the number of pulses. When Off, the number of output pulses from Y1 will be decided by S 2 . M1029: (SA/SX/SC) On when Y0 pulse output is completed. M1030: (SA/SX/SC) On when Y1 pulse output is completed. M1078:
(SA/SX/SC) Y0 output pauses. M1079: (SA/SX/SC) Y1 output pauses. M1102: (SC) On when Y10 pulse output is completed. M1103: (SC) On when Y11 pulse output is completed. M1347: (SA/SC) Auto zero return after Y0 output is completed. (Available only in SA V1.8 and later versions, SC V1.6 and later versions) M1348: (SA/SC) Auto zero return after Y1 output is completed. (Available only in SA V1.8 and later versions, SC V1.6 and later versions) M1524: (SC) Auto zero return after Y10 output is completed. (Available only in V1.6 and later versions) DVP-PLC APPLICATION MANUAL 7-30 PLSY K1000 K200 Y0 ut 1 2 3 200