7 Application Instructions API 50-99 Explanations: a) Whenever X0 is triggered, Y0 will output 1,000 pulses; whenever X1 is triggered, Y2 will output 1,000 pulses. b) When X triggers Y pulse output, there should be an interval of at least one scan time between the end of Y pulse output and the next X-triggered output. Program Example 2: X1 M1347 X2 END Explanations: When both X1 and X2 are On, Y0 pulse output will keep operating. However, there will be a short pause (approx. 1 scan time) every 1,000 pulses before the output of the next 1,000 pulses. DVP-PLC APPLICATION MANUAL 7-34 PLSY K1000 K1000 Y0