Pushbuttons and LCD Version WM Series 7 The functions of each button are defined by the configuration of the appliance. Button no. 1: TEMPERATURE The programme shows the base temperature, but pushing the button it is possible to modify it from a max. to a min. (allowed by the programme) and it is represented by the number of bars displayed and by the 2 digits. The star symbol appears when the cold cycle is selected. Button no. 2: SPIN The programme shows the maximum spin, but pushing the button, it is possible to vary the speed up to 400 rpm (represented by the number of bars displayed and by the 4 digits).
When the NIGHT CYCLE or RINSE HOLD is selected, the relative symbols light up (no value relative to the bars or the digits appears). At the end of the cycle the RINSE HOLD button flashes. Button no. 3: OPTIONS Configurable button: the available options for this button are: Pre-wash (it can be configured also as programme) Stains Sensitive Extra-rinse Button no. 4: OK Configurable button: it confirms the chosen options. Button no. 5: TIME SAVE Configurable button, the “TIME SAVE” function reduces the washing time. Button no. 6: START/PAUSE This button is configurable and it is combined to LEDs 20-21. Two LEDs, one yellow that flashes in case of alarm and one red:
> that flashes when the appliance is in pause, or in combination with the yellow one to indicate the alarm code. > remains lit during the cycle execution. SOI/DT 2007-11 dmm 20/69 599 70 39-88