User Manual EM303B General Purpose Inverter Fd-20, F3-30, and Fd-31 are read only for the users. 8.15 FE Group: User Defined Terminal Function Parameters Input/Output Terminal Control Options 8.15.1 Programmable Input/Output Terminal Options Because input terminal adapts level triggered mode or pulse triggered mode, when inverter is reading terminal status, the multi-function input terminal signals have to be processed by digital filtering in order to avoid interference. FE-00 does not need to be adjusted on general conditions. When adjustment is required, please note the relations between filter times and lasting time when terminal is on.
It is to avoid that inverter is ease to be interfered due to insufficient filter times, or slow response or command loss due to too many filter times. 8.15.2 Options of Input Terminal Logic FE-01=0 Positive logic, multi-function terminal is on at 0V, and off at 24V. FE-01=1 Negative logic, multi-function terminal is off at 0V, and on at 24V. The function is used for matching the logic of external device. 8.15.3 Input Terminal Delay Time Setting FE-02 and FE-03 are for setting how long the inverter will delay to response when external signals reached. 8.15.4 Analog Input Signal Options and Multi-function Terminal Extension 158 Fd-31 CPUA Software Version X.XX X.XX X No.
Function Range Unit Default Type FE-00 Numeric Input Filter Times 0～100； 1=0.50mS 10 〇 No. Function Range Unit Default Type Terminal Input Positive/Negative Logic X7 X6 X5 X4 X3 X2 X1 00000000 〇 0 0 0 0 0 0 0 FE-01 0: Positive Logic. On at 0V/Off at 24V 1: Negative Logic. Off at 0V/ On at 24V No. Function Range Unit Default Type FE-02 X1 Input Delay Time 0.00～300.00 S 0.00 〇 FE-03 X2 Input Delay Time 0.00～300.00 S 0.00 〇 No. Function Range Unit Default Type Analog Input Signal Options Ones place: VS input signal options 0: Analog signal input 1: Numeric signal input Tens place: IS input signal options 0: Analog signal input 1: Numeric signal input Hundreds place:
VF input signal options 0000 〇 FE-04