Network Guide Connecting the Printer to a Smart Device 4. Select Advanced Settings > Services > Wi-Fi Direct . 5. Select Connect to the Wi-Fi Direct devices only from Connection Mode . 6. Press Next , check the settings, and then press OK on the next screen. Note: The printer is set to connect in Wi-Fi Direct mode. This setting is available until the next time you change the mode setting. You do not need to make settings every time. 7. Press Network on the printer's home screen. 8. Press the icon with Wi-Fi Direct . 9. Press Start Setup . 10. Press Proceed . 11. Connect to the printer by Wi-Fi Direct from the smart device. Note:
❏ Wi-Fi Direct mode is disconnected if you turn the printer off or the smart device moves too far from the printer. Repeat steps 7 to 10 each time you want to use the printer. ❏ See the documentation provided with your smart device for instructions on connecting from the device using Wi-Fi Direct. You can check the connection between the printer and the smart device using Epson iPrint. Related Information & “Checking the Connection Between the Printer and the Smart Device” on page 18 & “Checking the Printer's Network Connection Status” on page 62 Checking the Connection Between the Printer and the Smart Device Make printer settings from a printing application and check the connection.
Epson iPrint is used here as an example. 18