▶ Never let the power cord come into contact with hot parts or be Avoiding material damage en dragged over sharp edges. ▶ Never place the appliance on or near hot surfaces. ▶ After switching off, wait until the drive has come to a complete standstill. ▶ Keep hands, hair, clothing and utensils away from rotating parts. ▶ Never touch the edges of the blades with bare hands. ▶ Process hot food carefully. ▶ Leave boiling food to cool down to at least 70 °C before pro- cessing. ▶ Follow the cleaning instructions. ▶ Clean surfaces which come in contact with food before each use.
Avoiding material damage Avoiding material damage Controls Controls Avoiding material damage ▶ Do not operate the appliance at no-load. ▶ Never use the blender jug in the mi- Controls Speed setting For continuous speed adjustment. Set the rotary selector between ● (lowest speed) and 12 (highest speed). On button To use the appliance at the preselected speed. Turbo button To use the appliance at maximum speed. Note: The appliance remains switched on as long as one of the buttons is pressed. crowave or oven. Overview Overview Overview → Fig.
1 steel blender foot 1 Overload protection Overload protection Overload protection Only CNHR26 and CNHR26C If the appliance switches itself off during use, the overload protection device has been activated. Remove the mains plug and leave the appli- ance to cool down for approx. 1 hour to de- activate the overload protection device. Note: If the fault cannot be eliminated, please contact customer service. 1 Depending on the model 2 separate operating instructions Blender feet Blender feet Note: If an accessory is not included in the scope of supply, it can be ordered from customer service. Blender feet Note:
The blender feet are not suitable for preparing purйes consisting only of pota- toes or foods with a similar consistency. Printed on 100% recycled paper 13 1 Speed setting 2 On button 3 Turbo button 4 Release buttons 5 Plastic blender foot or stainless- 6 Lid1 7 Plastic blender jug1 8 Whisk1 2 9 Universal cutter L1 2 10 Universal cutter XL1 2 11 "ProPuree" masher attachment1 2