^HW [Name] Transmit directory list [Format] ^HW d: o. x ,f [Function] Transmits the file information saved on the target drive to the host in list format. The file information specified by the target drive, file name, and extension is transmitted. The file information consists of the file name, extension, and file size. Specification can be performed using wild cards for Parameters o and x. An asterisk indicates an arbitrary character string. The response format can be specified using the format. If c is specified for the format, the response lists the file information with the indent aligned for each item.
[Response] Transmits multiple pieces of information in a list format separated by a comma , colon , or period . The following is an example response in basic mode. DIR : . * . : * . - bytes free : target drive> refers to the drive name specified by Parameter d. refers to the file name specified by Parameter o. refers to the extension specified by Parameter x. refers to the size [byte] of the specified file. refers to the amount of available capacity [byte] on the drive specified by Parameter d. refers to the type of the memory device, such as RAM or onboard flash. ESC/Label Command Reference Guide Rev.
L Page 152 Parameters Description Definition range d Target drive d = R/E/B/A/Z R: Volatile memory E: Non-volatile memory B: Optional memory A: Optional memory Z: Non-rewritable memory o File name ASCII code within 8 characters Wild card (Asterisk ) x Extension All extensions Wild card (Asterisk ) f Format f = c/d c: Column mode d: Basic mode