ESC/Label Command Reference Guide Rev. L Page 226 EA Error status E = Error status 2-character ASCII string NE: No error FE: Fatal error NI: Interface not selected error CO: Cover open error (Roll cover) IE: Replace Ink cartridge, or No Ink cartridge error SJ: Paper jam error SN: Paper out error MF: Replace maintenance box error SS: Media size error ST: Media source error SR: Paper recognition error CI: Ink cartridge cover open error MN: No maintenance box error CM: Maintenance box cover open error SE: Paper removal error LT: Maintenance error (tube life) CS: Paper cover open error CF: Front cover open error CR: Release lever open error CG: Guide unit open error SC:
Sensor calibration error IC: Cleaning not available due to low remaining ink MC: Cleaning not available due to insufficient waste ink capacity NP: Subscription non-printable error SM: Paper mismatch error ^HS F = Fatal error status 4-digits figure 0000: No fatal error None LS Media detection V = Media length Numerals [dot] None H = Media width Numerals [dot] None