System Messages - Alphabetical List User action: Select manual mode by moving the switch on the front panel to the manual position, or by activating the proper switch on a custom control panel. Retry the previous operation. *Controller not in network mode* (-317) Explanation: An attempt has been made to use a serial line configured for network use, but the controller is not in network mode. If you do not have a front panel connected, the controller is assumed to be in local mode. User action: Select network mode by moving the switch on the front panel to the network position, or by activating the proper switch on a custom control panel. Retry the previous operation.
*Control structure error* (-473) Explanation: An incomplete control structure has been encountered during program execution. User action: Edit the program to correct the control structure. *Control structure error * Step nn (-472) Explanation: eV+ has detected an incomplete or inconsistent control structure at the specified step when exiting the program editor, loading a program, or processing a BPT command. User action: Edit the program to correct the control structure. (Note that the actual error may not be at the indicated step.) If the error occurs in response to a BPT command, you can type dir /?
to identify programs that are not executable and thus might contain the control- structure error. Cursor at column n (None) Explanation: The SEE editor WHERE extended command is reporting the current column position of the cursor. User action: None. This is an informational message. *Database manager internal error* (-859) Explanation: This error indicates that the system has encountered an inconsistency. User action: Contact Omron Adept Application Engineering. Please record the details of exactly what you were doing at the time the error occurred. eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 595