System Messages - Alphabetical List and prevents HIGH POWER from being enabled. User action: Check any user manual mode switch that may be in use. Verify that the CIP is connected securely. Restart your eV+ system to clear the error and repeat the test. If the problem persists, contact Omron Adept Customer Service. *[Fatal] OVF Trap* at aaaaaa m:n (None) Explanation: An internal problem has occurred with the eV+ software or with the system hardware. User action: It would be appreciated if you would report the error to Omron Adept Application Engineering. Please include the details of the error message and exactly what you were doing at the time the error occurred.
To save programs that are in memory, you can restart eV+ temporarily by pressing Ctrl+G. The robot servos do not function, but you can STORE the programs. Then power down the controller and restart the system. *[Fatal] Priv Viol* at aaaaaa m:n (None) Explanation: An internal problem has occurred with the eV+ software or with the system hardware. User action: It would be appreciated if you would report the error to Omron Adept Application Engineering. Please include the details of the error message and exactly what you were doing at the time the error occurred. To save programs that are in memory, you can restart eV+ temporarily by pressing Ctrl+G.
The robot servos do not function, but you can STORE the programs. Then power down the controller and restart the system. *[Fatal] Servo code incompatible* CPU n (-1102) Explanation: During initialization, eV+ detected an improper version of servo software on the indicated CPU. eV+ continues to operate, but does not allow high power to be turned on. User action: Power down the controller and restart. If the problem persists, contact Omron Adept Customer Service. *[Fatal] Servo dead* Mtr n (-1104) Explanation: The servo process for the indicated motor is not responding to commands from eV+. eV+ continues to operate, but does not allow high power to be turned on. User action:
Power down the controller and restart. If the problem persists, contact Omron Adept Customer Service. eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 607