9. Lightly wipe off dirt from around the wiper using the cleaning cloth or clean stick moistened with maintenance liquid. Wipe off in the direction of the arrows. The same applies to the cleaning cloth. Wiper section Rear side of wiper 10. When cleaning is finished, close the front protection cover. 11. Turn the main power switch to 1 (ON) to turn the power on. 12. Release the emergency stop button. 13. Start up Leonardo. 14. Execute Set point. On the Leonardo operation screen, click [Setpoint] and then press the reset button on the main electric panel. The head carriage moves to the cleaning station. 30 Do not pull the rubber part of the wipers.