BUILDING & MOUNTING THE STRUCTURES 3-19 E UROCARGO Euro 4/5 Under no other circumstances may new holes be made in the flanges of the main side members. In those instances in which the box-body uses supports that are raised above the subframe (such as cross members) it will be necess- ary to stiffen these supports in an appropriate manner in order to contain the longitudinalwise thrusts, as shown in Figure 3.15. Figure 3.15 91529 1. Subframe - 2. Brackets - 3.
Securing anchorages For special builds when a reinforcing runner of limited height is needed, the subframe structure may be integrated with the body anchoring brackets matching the height of the whole longitudinal reinforcement runner (see Figure 3.16). In this case, rear wheel boxes may be fitted at the base of the fixture. Fitting box-bodies Print 603.93.431 Base - January 2008