POWER TAKE-OFFS 4-19 E UROCARGO Euro 4/5 4.6.5 Standard configurations The following table gives the adjustments made in the factory. Table 4.7 PTO mode Enabled using 21 pin connector No activation is needed Pin 18 and 17 connected Pin 19 and 17 connected Pin 20 and 17 connected Maximum N ° of revs that can be reached with SET+, N SET_max maximum speed according to the maximum no. of turns of the engine The increase or decrease in the engine revs with the SET+/SET- button is 250 rpm.
PTO management Print 603.93.431 Base - January 2008 Mode 0 Mode 1 Mode 2 Mode 3 Max engine torque Maximum engine torque Maximum engine torque Maximum engine torque Maximum engine torque Minimum N° of revs that can be reached with SET-, NSET min _ minimum speed according to the default NLL no.
of turns of the engine Runaway speed regulator gradient Dependent on nominal curve ~1CV/rpm ~1CV/rpm ~1CV/rpm Accelerator pedal On On On Off Use of the CC buttons (Resume/OFF/SET+/SET-) On On On Off N° revs stored, Nres 900 rpm 1100 rpm 1300 rpm 1450 rpm Maximum speed of the vehicle, above which PTO mode is disabled, VZDR max _ 25 km/h 30 km/h 30 km/h 0 km/h Exclusion of PTO mode using brake or clutch On Off Off On Call-up intermediate speed regime stored on enabling PTO mode On Off Off Off Exclusion of PTO mode (using parking brake) Off Off Off On