SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS 5-13 E UROCARGO Euro 4/5 Installation of anti---theft devices 5.3 Installation of anti-theft devices For their installation, observe the precautions and indications given below. Types of anti-theft systems: IVECO recommends using products that meet the requirements and are approved by the recognized institutes such as ANIA, TЬV, UTAC, etc. Likewise follow the indications given in the Technical Specifications issued by the specialized Institutes on Quality (e.g. IMQ), at the request of the Insurance companies. They provide indications, requirements, performance of components and systems, as well as the criteria of conformity.
Installation The control devices must be positioned so as not to allow accidental operation while the vehicle is running in order to avoid hazardous situations after it has suddenly stopped. If additional switches are installed to stop the vehicle from starting, so as to prevent it accidentally cutting in when driving, with the consequences above described, it is recommended to: - Use suitable components to withstand vibration, changes in temperature, etc. - Do the installation in areas protected from accidental impact caused by people and/or property. The installation must respect IVECO requirements in terms of electrical system (see point 2.21) and working environment (e.g. max.
temperature). The application of anti-theft systems must not alter the functionality of the systems and components such as ABS, tachograph, etc. The anti-theft system must make no provision for any connections or interfacing with the EDC system that is not according toIVECO prescriptions. Electrical interceptions upstream and downstream from the EDC control unit are forbidden. Installation of anti-theft devices Print 603.93.431 Base - January 2008