GENERAL SPECIFICATIONS 1-15 E UROCARGO Euro 4/5 Quality System management - Adequate ventilation of the brakes and battery case (especially in the case of box bodies) must be guaranteed. - The positioning of the mud-guards and wheel-arches must allow free movement of the rear wheels even when chains are being used. Sufficient space must also be ensured with lifting axles. Some of our models have 3 rd axle steering which also steers in the raised position; and it is necessary to leave space for this function (see point 2.21). - When the vehicle has been set up, for safety reasons, headlight attitude must be checked and adjusted as necessary.
Perform the adjustment according to the instructions provided in the user and maintenance manual. - In the case of parts which are supplied loose (e.g. spare wheel, chocks) it will be the responsibility of the bodybuilder to position and secure them in an accessible and safe manner in compliance with possible national regulations. 1.15 Quality system management For some time IVECO has been promoting Quality System development and training for bodybuilders. This is a requirement due not only to compliance with domestic and international regulations on product liability, but also thegrowing demand for increasingly higher quality levels.
The creation of new forms of organization in the various sectors and the quest for increasingly more advanced levels of efficiency. IVECO believes it essential for bodybuilders to be equipped and organised where the following are defined and available: - organization charts for functions and responsibilities. - Quality System. - quality goals. - technical design documentation. - process and control phases with relevant resources. - product improvement plan, obtained also with corrective actions. - after sales service. - staff training. - manufacturer liability documentation.
1.16 Vehicle maintenance In addition to making the necessary checks on the body/structure in keeping with customary working procedures, the bodybuil- der shall perform the checks specified in the “IVECO pre-delivery inspection” list, which can be obtained from the IVECO network, for the aspects affected by the modifications performed. Quality System management Print 603.93.431 Base - January 2008