Left Lower Cover Figure 6-9 Left Lower Cover CAUTION Be careful not to damage the plastic guides on the inside of the lower left cover. They are part of the Duplexer paper path. 1 Remove the Diverter Assembly access door (see figure 6-15). 2 Remove 2 screws (figure 6-9, callout 1). 3 Press down firmly on the top cover outer ends to release the retaining tabs on the inside of the cover (figure 6-9, callout 2) and the retaining tabs at the lower edge of the cover (figure 6-9, callout 3). 4 Pull the cover away from the chassis, left side first. To Reinstall: 1 Relocate the right side of the cover behind the plastic edge piece first.
2 Slide the cover toward the chassis and insert the two retaining tabs into position. Lift up to snap the cover into place. 170 Chapter 6 Removal and Replacement C4085-91087