Figure 6-73 2000-sheet Input Tray Rollers: Pickup, Feed, and Separation To Remove the Feed and Separation Rollers 1 Open the Vertical Transfer Unit (VTU) on the 2000-sheet Input Tray. 2 Locate the rollers inside the tray cavity. To remove a roller, pinch the retainer tabs together and slide the roller off the shaft. Remove the Feed Roller (upper-rear roller) first. Then remove the Separation Roller (lower roller). To Remove the Pickup Roller 1 Open the paper tray on the 2000-sheet Input Tray to the stops. 2 Remove the Left Cover from the 2000-sheet Input Tray (see figure 6-64 on page 235). 3 Locate the Pickup Roller inside the tray cavity.
4 Pinch the recessed retainer tab on the roller, and slide the roller off the shaft. Note Reassembly notes are on the next page. C4085-91087 2000-sheet Input Tray Removal and Replacement 251