Power Supply Figure 6-152 8-bin Mailbox Power Supply 1 Locate the cable that runs from the 8-bin Mailbox Power Supply down to the 8-bin Mailbox Controller PCA, and disconnect the cable from the Controller PCA (Figure 6-152, callout 1). 2 Remove the Power Supply from the Back Cover of the 8-bin Mailbox by pressing the plastic retaining tabs that are on each side of the Power Supply (callout 2). To Reinstall: 1 Align the Power Supply with the mounting holes that are on the Back Cover so that the retaining tabs on the Power Supply (callout 2) fit into their respective slots. 2 Reconnect the Power Supply Cable to the 8-bin Mailbox Controller PCA (callout 1).
334 Chapter 6 Removal and Replacement C4085-91087