Figure 6-155 8-bin Mailbox Flipper Assembly (2 of 3) 4 Hold down the Jam Access Door while unplugging the ground wire that runs from the Input Paper Guide to the Flipper Motor (Figure 6-155, callout 2). 5 Unplug the Flipper Assembly’s 3 cables from the connectors that are located on the 8-bin Mailbox unit’s back side (Figure 6-154, callout 3). 6 Using a flat-blade screwdriver, release the plastic retaining tab that secures the Flipper Assembly to the top of the 8-bin Mailbox frame (Figure 6-156, callout 4). C4085-91087 8-bin Mailbox Removal and Replacement 337