Delivery Head Motor 1 Remove the Back Cover from the 8-bin Mailbox (see Figure 6-150). Figure 6-157 8-bin Mailbox Delivery Head Motor 2 Locate the cable that runs from the Delivery Head Motor down to the 8-bin Mailbox Controller PCA, and disconnect the cable from the connector in the middle of the 8-bin Mailbox frame (Figure 6-157, callout 1). 3 Remove the 2 screws that secure the Delivery Head Motor to the 8-bin Mailbox frame (callout 2). 4 Pull the Delivery Head Motor away from the 8-bin Mailbox frame. To Reinstall: 1 Position the motor in the 8-bin Mailbox frame so that the cable grommets face down. 2 Reconnect the motor’s cable to the connector in the middle of the frame (callout 1).
C4085-91087 8-bin Mailbox Removal and Replacement 339