Metal Tape and Housing Assembly 1 Remove all the paper bins and the Blind Cover from the 8-bin Mailbox (see Figure 6-153). Figure 6-161 8-bin Mailbox Metal Tape and Housing Assembly (1 of 2) WARNING! The Metal Tape’s sharp edges can cause serious injury. When rewinding the Metal Tape into its housing, hold the tape securely and rewind it slowly. 2 With the Delivery Head Assembly at the top of the 8-bin Mailbox, hold the Metal Tape near the end, and push and release the retainer tab that secures the end of the tape to the top of the 8-bin Mailbox frame (Figure 6-161, callout 1). Then let the tape slowly rewind into its housing.
3 Remove the 1 screw that secures the Static Brush to the Delivery Head Assembly (callout 2), and then move the Static Brush out of the way. 4 Lower the Delivery Head Assembly halfway to the stops. 344 Chapter 6 Removal and Replacement C4085-91087