Figure 6-162 8-bin Mailbox Metal Tape and Housing Assembly (2 of 2) 5 Using a flat-blade screwdriver, release the plastic retaining tabs located on each side of the tape housing (Figure 6-162, callout 3). 6 Gently pull on the Delivery Head Assembly to remove the end of the tape from behind the rollers that hold the tape in its track (callout 4). Then pull the tape housing toward you to remove it. To Reinstall: 1 Thread the end of the Metal Tape behind the rollers (callout 4), and then pull the end of the tape to the top of the 8-bin Mailbox and reinsert it into place (Figure 6-161, callout 1). 2 Use the guide pins to reinstall the tape housing (Figure 6-162, callout 3).
When the housing is correctly positioned, it will click into place. 3 Reinstall the static brush (Figure 6-161, callout 1). C4085-91087 8-bin Mailbox Removal and Replacement 345