Attachment Assembly 1 Disconnect the power cable and the C-link cable from the 8-bin Mailbox Controller PCA (see Figure 6-163, callouts 1 and 2). 2 Release the Controller PCA from the 8-bin Mailbox frame, but leave the wire cables connected to the Controller PCA (see Figure 6-164). Figure 6-177 8-bin Mailbox Attachment Assembly 3 Set the Controller PCA on top of the 8-bin Mailbox unit (Figure 6-177, callout 1). 4 Remove the E-clip (callout 2). 5 Release the pivot pin that holds the Attachment Assembly’s rod to the 8-bin Mailbox frame. 6 Remove the attachment assembly. To Reinstall: 1 Replace the E-clip. 2 Reconnect the C-link cable and the power cable to the Controller PCA.
C4085-91087 8-bin Mailbox Removal and Replacement 361