Table 7-11. 8-bin Mailbox Error Messages (continued) C4085-91087 Printer Messages 431 Control Panel Message Event Log Error Message Description Recommended Action 13.22 or 13.12 PAPER JAM IN OUTPUT DEVICE 13.22 01 or 13.12 01 Flipper Entry Sensor (PSEntry) Jam. 1. Open the Jam Access Door and remove any jammed paper. 2. Make sure that the Full Bin Sensor Flag (PSFaceFull) moves freely. 3. Make sure that the Flipper's shaft is not out of place. 4. If the problem persists, replace Flipper Assembly. 5. Replace the MBM Controller PCA. 13.22 02 or 13.12 02 Flipper Face-up Sensor (PSFaceup) Jam. 1. Open the Jam Access Door and remove any jammed paper. 2.
Make sure that the Full Bin Sensor Flag (PSFaceFull) moves freely. 3. Make sure that the Flipper's shaft is not out of place. 4. If the problem persists, replace the Flipper Assembly. 5. Replace the MBM Controller PCA. 13.22 03 or 13.12 03 Belt Jam (Transport Belt Motor (M5) stop for an unexpected reason). 1. Check for jammed paper at the double-belt system and Delivery Head Assembly. 2. Ensure free movement of the double belt (both belts). 3. Ensure parallel position of the double belt system. 4. Check that the Metal Tape is in place and in good condition. 5. Replace the Transport Belt Motor (M5). 6. Replace the MBM Controller PCA. 7. Replace the Delivery Head Assembly.