Table 7-12. Stapler Error Messages (continued) 436 Chapter 7 Troubleshooting C4085-91087 Control Panel Message Event Log Error Message Description Recommended Action FINISHER OUT OF BINDING AGENT Error The external paper handling finisher device is out of binding agent. Refill the finishing device. STAPLER LOW ON STAPLES Warning The stapler device is running out of staples. Refill the stapler device. STAPLER OUT OF STAPLES Warning The external paper handling stapler device is out of staples. Refill the stapler device. TOO MANY PAGES IN JOB TO STAPLE Warning The external paper handling stapler device received too many pages to staple. The pages will be ejected unstapled.
Staple the pages manually. 13.23 or 13.33 PAPER JAM IN OUTPUT DEVICE 13.33 0A Staple Jam. • Clear jammed staple. • Replace staple cartridge. • Replace Stapler Top Cover Assembly. • Replace Stapler Controller PCA. 13.33 0B Rack Jam. • Remove jammed media. • Perform a device reset cycle by opening and closing the Stapler Top Cover. • Manually move the internal parts of the stapling unit looking for free movement. • Replace the Stapler Top Cover Assembly. • Replace the Stapler Controller PCA 13.33 0C Slider Jam. • Remove jammed media. • Perform a device reset cycle by opening and closing the Stapler Top Cover.
• Manually move the sliders looking for free movement and observe the power on sequence. • Replace the Stapling Bed Assembly • Replace the Stapler Controller PCA.