Configuration Menu Items in this menu affect the printer’s behavior. Configure the printer according to your printing needs. Table 3-8. Configuration Menu ,WHP 9DOXHV ([SODQDWLRQ Set the printer to enter power save after it has been idle for a specified amount of time. Turning power save off is not recommended. The power save feature does the following: Minimizes the amount of power consumed by the printer when it is idle. Reduces wear on the printer’s electronic components. (Turns off the display’s backlight.) When you send a print job, press a control panel key, open a paper tray, or open the top cover, the printer automatically comes out of power save mode.
Note Power save turns off the backlight on the display, but the display is still readable. POWERSAVE ON= 1 HOUR OFF 15 MINUTES 30 MINUTES 1 HOUR 2 HOURS 3 HOURS PERSONALITY= AUTO AUTO PCL PS Select the default printer language (personality). Normally you should not change the printer language (the default is AUTO ). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer. C4085-91087 Control Panel Menus 67