4 From the watch face, hold , then select Watch Settings > Connectivity > Chartplotter > Pair New . 5 On the chartplotter, select the name of your watch. 6 Select Connect . Your watch appears on the chartplotter as Paired. Enabling Boat Mode on a Garmin ® Watch You must enable Boat Mode on your compatible Garmin watch before you can access some of the chartplotter- linked features, such as voice control. 1 On the watch, hold to open the controls menu. 2 Select Boat Mode .
Using a Garmin ® Watch with a Garmin Chartplotter for Voice Control Before you can use Boat Command with your compatible Garmin watch, you must enable Boat Mode on the watch ( Enabling Boat Mode on a Garmin ® Watch , page 28 ). After you pair a compatible Garmin watch with the chartplotter for voice control, you can speak a command to the watch. The chartplotter hears your voice commands, and speaks a reply through the wearable device, when applicable. NOTE: Boat Command is available only on select quatix ® models. NOTE: If you do not hear spoken replies through your watch, make sure the volume on the watch is set high enough for the environment.
1 On the watch, press , and select the Boat Command app. TIP: If you have not changed the default Hold START function on your watch, you can hold to open the Boat Command app. The app opens on the watch, and a line appears just above the menu bar on the chartplotter. The watch beeps when it is ready for you to speak a command. 2 After you hear the beep from the watch, speak a voice command. The watch beeps again to indicate it has heard the command, and the chartplotter performs the command. If it is applicable to the command, the watch speaks a reply. Chartplotter Voice Commands The voice command system is designed to detect natural speech.
This is a list of commonly used voice commands, but the device does not require these exact phrases (other than OK Garmin ). You can try saying variations of these commands in a way that is natural to you. Device and Screen Functions 28 GPSMAP® 8400/8600/8700 Series Owner's Manual Controlling the Chartplotter Voice Wake Word Function OK Garmin Wakes up the chartplotter to listen for voice commands Voice Help Command Function What can I say?
Shows a list of common voice commands Voice Command Function Show Navigation Chart Opens the navigation chart screen Show Fishing Chart Opens the fishing chart screen Show Radar Opens the radar screen Show Sonar Opens the sonar screen Zoom In Zooms in Zoom Out Zooms out Raise Brightness Raises the display brightness Lower Brightness Lowers the display brightness Automatic Brightness Enables automatic display brightness adjustment Set brightness to 80 Set the brightness to a specified level. For example, you can say "Set brightness to 80," and the brightness level will adjust to 80 percent. Sleep Display Puts the display to sleep