Paper-pickup assembly 1 Remove the DIMMs, the back, right, and left covers, the internal paper guide, and the top cover (see pages 89 through 95). 2 Disconnect the laser/scanner. 3 Remove the screw attached to a bracket at the right end of the cover plate (callout 1). 4 Remove the two top screws attached to the right and left of the plate (callout 2). 5 Remove the two screws located underneath the plate, securing it to the paper-pickup assembly (callout 3). 2 2 2 3 2 1 Figure 58. Paper-pickup assembly removal (1 of 2) 132 Chapter 5 - Removal and replacement EN