Primer Valves Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Right Connector Cover ⇒ See page 285. 3. Remove the Front Panel ⇒ See page 292. 4. Disconnect both Primer Valves from the from Interconnect PCA. NOTE: The upper connection is identified as number 5 and the lower connection as number 6. These identification numbers correspond to the actual Primer Valves identification. Removal & Installation 5. Unroute the Primer Valves cables from the from cable clamp. 6. Completely unroute the Primer Valves cables from the Service Station. 296 Chapter 8 Removal & Installation