Carriage Flex Cables Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Front Panel ⇒ See page 292 . 3. Remove the Primer Assembly ⇒ See page 294 . 4. Press the two side of the Carriage PCA Cover and unclip from the Carriage Assembly. 1 2 1 Removal & Installation 5. Use a flat bladed screwdriver to release the ALL the clips, securing the Carriage Flex Cables to the Carriage Assembly, by pulling upwards. 6. Disconnect the ALL the Flex Cables from the Carriage PCA. Carriage Flex Cables 337