OMAS Cable Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Right Connector Cover ⇒ See page 285 . 3. Remove the Service Station ⇒ See page 300 . 4. Remove the OMAS ⇒ See page 351 . 5. Remove one T-15 screw that secures the OMAS Cable clamp from the printer. Removal & Installation 6. Remove the OMAS Cable clamp from the printer. 7. Carefully Pull the OMAS Cable out of the Vacuum Beam. 364 Chapter 8 Removal & Installation