2 1 2 Figure 44. Removing the top cover 3 Open the rear output bin, and then remove two screws (callout 1) from the top cover, near the top of the bin. 4 Remove two more screws (callout 2) located under the top cover door. Figure 45. Releasing tabs to lift the top cover 5 Squeeze the frame below the tab to release the top cover. It might be necessary to use a small flat-blade screwdriver to release the tab inside the small hole. 6 Holding the output delivery assembly in place (located toward the rear of the printer), remove the top cover. 142 Removing and replacing parts EN