Resets menu Use the reset and restore options on this menu with caution. You can lose buffered page data or printer configuration settings when you select these items. Only reset the printer under the following circumstances: ! You want to restore the printer’s default settings. ! Communication between the printer and computer has been interrupted. The items in the resets menu will clear all memory in the printer, while C ANCEL J OB clears only the current job. Table 28. Resets menu Item Values Explanation NEW TONER CARTRIDGE=NO NO YES Change the value to YES when you first install a non-HP toner cartridge.
YES allows the printer to recognize the new cartridge, and the printer resets the toner gauge to full. RESTORE FACTORY SETTINGS Press S ELECT to perform a simple reset and restores most of the factory (default) settings. This item also clears the input buffer for the active I/O. POWERSAVE= ON ON OFF This item turns the PowerSave mode on or off. POWERSAVE=ON mode does the following: ! Minimizes the amount of power consumed by the printer when it is idle !
Reduces wear on the printer’s electronic components by turning off the backlight on the display When you send a print job, press a control panel key, open a paper tray, or open the top cover, the printer automatically comes out of PowerSave mode. In the configuration menu, you can set how long the printer remains idle before it enters PowerSave mode. Turning PowerSave off is not recommended. Note PowerSave turns off the backlight on the display, but the display is still readable. EN Chapter 3 Printer operation 73