Chapter 4: BIOS SATA0 IDE Interface This setting is used to Enable or Disable the serial controller for SATA0. SATA1 IDE Interface This setting is used to Enable or Disable the serial controller for SATA1. IO4 SATA0 IDE Interface This setting is used to Enable or Disable the serial controller for IO4 SATA0. IO4 SATA1 IDE Interface This setting is used to Enable or Disable the serial controller for IO4 SATA1. First Boot Device From Use this setting to select the fi rst boot device as being P-ATA or S-ATA. Confi guration nVidia RAID ROM RAID Option ROM This setting is used to Enable or Disable the nVidia ROM.
Floppy Confi guration Floppy A Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ” , and 2.88 MB 3Ѕ". Floppy B Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled , 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ”, and 2.88 MB 3Ѕ". Onboard Floppy Controller Use this setting to Enable or Disable the onboard fl oppy controller. 4-5