Hantek 6000EU Digital Oscilloscope 9. Move Wareform 10. Displays the system time. 11. Sample rate 12. The markers show the CH1/CH2/CH3/CH4 reference points of the displayed waveforms. If there is no marker,the channel is not displayed. 13. Connect 14. Displays the CH1/CH2/CH3/CH4 information: Readouts show the coupling of the channels. Readouts show the vertical scale factors of the channels. A “B” icon indicates that the channel is bandwidth limited 15. Marker shows horizontal trigger position. 16. Trigger status indicates the following: AUTO: The oscilloscope is in auto mode and is acquiring waveforms in the absence of triggers. Trig’D:
The oscilloscope has seen a trigger and is acquiring the post trigger data. STOP: The oscilloscope has stopped acquiring waveform data. RUN: The oscilloscope is running. USER’S MANUAL 18