Application measurement EN screen will display "USB Device Connect"。 2 In the statistical calculation interface, click on S/L->Save Data . The screen will display "File saved successfully", and the instrument will automatically generate a file name and save it to the USB drive. The file is named based on the current system time. Steps for calling up data settings: 1 Firstly, turn off the statistics function and insert the USB drive into the USB port on the front panel of the instrument. After successful connection, the screen will display "USB Device Connect ".
2 In the statistical calculation interface, click on S/L -> Load Data , use up/down keys to move the cursor to select a file, click [OK] to retrieve the file, and the screen will display "File loaded successfully". 3 Click Stat Result -> List to view the file data currently called out. 6.3.5 Data Temp The HBT3000 series internal resistance tester can record up to 1000 sets of statistical data. Through the data caching function, the size of the data cache area can be set, that is, the number of recorded values for each statistical test. For example, if the data cache is set to 10, the instrument will automatically stop recording when the recorded value reaches 10.
Click [STAT] -> Data Storage , left and right click to move the cursor position, and click [OK] for input. Move the cursor to the key , then click [OK] to save and exit. 6.3.6 Data Clearing Click [STAT] -> Clear data , click [OK] to confirm clearing, and click [ESC] to cancel clearing. If the statistics function is not turned off, click Clear Data, and the instrument will clear the current count and automatically perform the next statistics. 6.4 System Settings Click [Utility] to enter the system settings interface. The system settings include Sys info, Cal, IO, and Other.
Click on [Utility] -> Sys info in sequence to view device information (such as model, serial number, software version, hardware version, etc.). In addition, system information can also be viewed by clicking on [VIEW] . After the system information menu pops up, if no action is taken on the interface for more than 30 seconds, the system information will automatically close. HBT3000 series user manual Copyright © Qingdao Hantek Electronic Co., LTD 36