Readership The procedures described in this service manual are to be performed by HP Certified service personnel only. Part numbers Part numbers for printer service parts are located in Parts and diagrams on page 184 . Warning labels Electric shock hazard Hazardous voltage inside the printer (built-in power supply) could result in death or serious personal injury. See the installation instructions before connecting power. Ensure that the input voltage is within the printer's rated voltage range. Use only earthed mains outlets and the power cords supplied by HP with the printer. There are no operator-serviceable parts inside the printer. Refer servicing to qualified service personnel.
Disconnect the power cord before servicing. Voltage is still present in the built-in power supply after the main switch is turned off. Double pole/neutral fusing Electric shock hazard. The built-in power supply incorporates a fuse on each conductor, therefore the printer could be energized even when one fuse has blown. There are no operator-replaceable fuses inside. Refer servicing to qualified service personnel. Disconnect the power cord before servicing.
4 Chapter 1 Printer fundamentals ENWW Feature CR354A HP Designjet T920 36-in ePrinter CR355A/B HP Designjet T920 36-in PostScript ePrinter CR356A HP Designjet T1500 36-in ePrinter CR357A/B HP Designjet T1500 36-in PostScript CR358A HP Designjet T2500 eMultifunction and CR358A/B HP Designjet T2500 PostScript eMultifunction B9E24A/B HP Designjet T3500 Production eMFP Crop marks and nesting X X X X EWS job submmital X X X X Job on-hold for media (mummify) X X X X X Auto rotate, automatic blank area removal X X X X X X Accounting in EWS X X X X