Checking the Take-Up Reel is correctly installed Troubleshooting Many system error codes are displayed as a result of the Take-Up Reel not being installed correctly or because parts have moved or become dislodged from their correct positions. This troubleshooting procedure checks the mechanical installation of the Take-Up Reel. 1. Check that the Take-Up Reel sensor unit is correctly installed on the right foot. 2. To correctly install the foot, the wheel has to be positioned as shown. 3. Check the cables linking the sensors to the Take-Up Reel Motor Assembly are correctly connected. ENWW Troubleshooting a failure with the Take-Up Reel (TUR) 11