Table 1-9. Electrical specifications, HP LaserJet 1320nw printer NOTE Values are current as of April 1, 2004. Values are subject to change without notice. See http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current information. NOTE The power reported is the highest value measured for monochrome printing using all standard voltages. NOTE The default time from Ready mode to PowerSave mode and the recovery time from PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant-on fuser technology. NOTE The heat dissipation in Ready mode is 20 BTU/hour.
ENWW Specifications 9 Power requirements, 110-127 V models 110-127 V (+/-10%), 50/60 Hz (+/-2) Power requirements, 220-240 V models 220-240 V (+/-10%), 50/60 Hz (+/-2 Hz) Power consumption ● During printing (22 ppm): 345 watts (average) ● During Ready (Standby) and PowerSave (instant-on fuser technology) modes: 6 watts ● Off: Minimum recommended circuit capacity for typical product ● 4.5 amps at 115 Power requirements (110) ● 2.6 amps at 230 Power requirements (110)