Site Requirements The following environmental specifications must be maintained to ensure the proper operation of the printer. Consider the following points before installing the printer: z Install in a well-ventilated, dust-free area. z Install on a hard, flat and continuous surface, with all four printer feet level. Do not install on carpet or other soft surfaces. z Ensure adequate power is supplied. Printer power requirements are listed in Table 1-3. z Install where temperature and humidity is stable, away from water sources, humidifiers, air conditioners, refrigerators, or other major appliances. z Install away from direct sunlight, open flames, or ammonia fumes.
If the printer is placed near a window, make sure the window has a curtain or blind to block any direct sunlight. z Install with enough space around the printer for proper access and ventilation. z Install printer away from the direct flow of exhaust from air ventilation systems. Table 1-3. Electrical Specifications Volts Frequency Amps Watts (typical) 100-127 VAC±10% 50/60 Hz ±3Hz 8 amps printing = 330 standby = 18 PowerSave On = 16 (EPA E NERGY S TAR ®) 220-240 VAC±10% 50/60 Hz ±3Hz 4 amps printing = 330 standby = 18 PowerSave On = 16 (EPA E NERGY S TAR ®) 1-6 Printer Description EN