2. Pull the fuser straight back and out of the product. CAUTION: Do not drop or jar the fuser. It can easily be damaged if it is mishandled. TIP: When you replace the fuser, make sure that it is fully seated into the product. You should hear both sides snap into place. Figure 2-11 Remove the fuser (2 of 2) Formatter cover and formatter cage 1. Grasp the formatter cover. 2. Pull the cover straight back and away from the product. Figure 2-12 Remove the formatter cover and formatter cage (1 of 3) ENWW Customer replaceable units (CRUs) 71