Service approach Before performing service ● Remove all media from the product. ● Turn off the power using the power switch. ● Unplug the power cable and interface cable(s). ● Place the product on an ESD mat (if one is available). If an ESD workstation or mat is not available, ground yourself by touching the sheet-metal chassis before touching an ESD-sensitive part. ● Remove the toner cartridges. ● Remove the tray 2 cassette. After performing service ● Connect the power cable. ● Reinstall the toner cartridges. ● Reinstall the tray 2 cassette. 6 Chapter 1 Removal and replacement ENWW