Note: The hard disk drive can be removed by the user for easy upgrades. The hard drive is located on the bottom case and with the removal of one screw the hard drive can be removed. The hard drive plastic case on the OB5000 is changed from the OB4000 due to a design change requirement; therefore, they are not interchangeable between platforms. Flexible disk drive Internal 3.5 inch, 1.44-MB flexible disk drive is standard on all models. The flexible disk drive can be easily removed by the user and replaced with an additional battery pack to double battery life. This is part of the modularity features of the OmniBook 5000. Manufacturer:
F1079A = Canon; F1079B = NEC (subject to change) Built-in I/O 9-pin, 115,000-b/s RS-232 port, UART 16550 25 pin bi-directional ECP and EPP parallel port SVGA out (up to 1024 x 768 x 256 colors) with simultaneous viewing VGA out (640 x 480 x 65,536 colors) 115,000-b/s bi-directional infrared port. Note: Infrared hardware can support the IRDA (Infrared Data association) higher speed standards when available. Expansion Bus Connector for connecting to the docking station. SCSI-2 port, mini 50 pin. Controller: AMD, 32-bit PCI bus, 10 MBps, asynchronous max.
transfer NTSC/PAL port Keyboard/mouse port Headphone/stereo-out port Microphone port Stereo-in port MIDI/joystick port 17 Sector Size 512 Bytes 512 Bytes 512 Bytes 512 Bytes Recording Zones 4.00 8.00 8.00 8.00 User Cylinders NA NA 3478.00 3478.00 Cylinders 1053.00 1591.00 NA NA User sectors/Track at zone 0 63.00 63.00 NA NA Data Heads 4.00 8.00 4.00 6.00 Disks NA NA 2.00 3.00