Table 1-2.
OmniBook 4100/4150 Series Models 1-2 Product Information HP OmniBook 4100/4150 OmniBook CPU ** Display Hard Drive Floppy Drive CD-ROM Standard Product * Drive RAM OmniBook 4100 F1462x Pentium II 233 MHz 13.3-inch XGA TFT 4 GB (F1467A) 1.44 MB (F1472A) CD-ROM (F1474A) 32 MB F1463x*** Pentium 266 MHz 14.1-inch XGA TFT F1464x Pentium II 266 MHz 6 GB (F1475A) F1479x 4 GB (F1467A) F1703x 13.3-inch XGA TFT OmniBook 4150 Series F1629x Pentium II 300 MHz 14.1-inch XGA TFT 6 GB (F1475A) 1.44 MB (F1472A) CD-ROM (F1474A) 64 MB (F1457A) F1640x Pentium II 333 MHz F1641x Pentium II 366 MHz F1642x 10 GB (F1744A) DVD Drive (F1653A) 128 MB (F1622A) F1647x Pentium II 300 MHz 4.8 GB (none) CD-ROM (F1474A) 64 MB (F1457A) F1648x Pentium II 400 MHz 10 GB (F1744A) DVD Drive (F1653A) F1658xB Pentium II 366 MHz 13.3-inch XGA TFT 4.8 GB (none) CD-ROM (F1474A) 64 MB (F1457B) F1660xB Pentium II 400 MHz 14.1-inch XGA TFT 6 GB (F1475A) F1663x Pentium II 366 MHz 4.8 GB (none) 64 MB (F1457A) This table lists only base product configurations—custom configurations are not included.
* For the products listed: "x" suffix means "N", "NT", “NV”, “NG” for Windows NT 4.0 installed (marketing distinction only), or "W", "WT", “WV”, “WG”, “WR” for Windows 95 or Windows 95/98 installed (marketing distinction only). ** Intel Mobile Pentium or Pentium II processor. *** Available only with Spring ’98 software—other OmniBook 4100 products rolled to Fall ’98 software. All OmniBook 4150 products were released with Fall ’98 software or later. B The OmniBook 4150 Series has two classes of products with different internal designs, different software drivers, and different BIOSes.
Models marked with B have “4150 B” after the serial number and are called 4150B in this manual—other OmniBook 4150 models listed in this table are called 4150† in this manual, and they have no marking after the serial number.