Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 20 of 510 Part # Part Name Type Description Page CQ114-67044 FRM,IGUS CHAIN BRKT,U _ _ Carr Trolley attachment bracket--This is the bracket that mounts to the top of the trolley plate for attaching the umbilical track. Common to 500-700. page 244 CQ114-67045 FRM,TRACK CLAMP PART _ _ S KIT,U _ Track This is the clamp parts used at rail/track attachment and at track/ carriage attachment. Two are used per printer; this FRM is for qty. 1. Common to 500-700.
page 417 CQ114-67046 FRM,IGUS HDBD PWR C _ _ _ BL,U Track This is the power cable in the track from the electronics assembly to the headboard. Common to 500-700. page 417 CQ114-67048 FRM,FB500,IGUS,TRACK L _ INKS ONLY _ Track This is the track chain only (no cables, tubes, etc.) for the FB500. CQ114-67049 FRM,FB500,INK TUBE AS _ _ SY Track This is a replacement ink tube assembly for any color. This FRM is size-specific to FB500. This is the long ink tube with 109.75" (278.75cm) of 4mm O.D. tubing and two attached shorter lengths of 3/16" O.D. tubing. CQ114-67050 FRM,FB500,CMPLT IGUS _ _ ASSY Track This is the complete track assembly, with all cables, tubing, etc., for FB500.
CQ114-67051 FRM,LCD TOUCH PANEL _ _ _ CBL,QU Elec This is the serial data cable between the LCD control panel and the I/O board. This is the touch-sensitive data transmission cable. page 383 CQ114-67052 FRM,LCD VGA CBL,QU _ _ Elec This is the 'VGA cable between the LCD control panel and the motherboard. This is for video display. CQ114-67053 FRM,LCD PWR CBL,U _ _ Elec This is the power cable between the LCD control panel and the I/ O board. page 383 CQ114-67054 FRM,LCD,U Elec This is the touch-sensitive LCD control panel. Common to 500-700. CQ114-67055 FRM,DRV RLR BRNG/ _ _ BLK/RING,U Med Drv This is the media-drive roller bearing block and retaining ring.
Qty 2 are used per printer; this FRM is for qty 1. Common to 500-700. CQ114-67056 FRM,IDLE RLR BRNG/ _ _ BLK/RING,U Med Drv This is the idler roller bearing, block, and retaining ring. Qty 2 are used per printer; this FRM is for qty 1. Common to 500-700. CQ114-67059 FRM,FB500,MEDIA DRV R _ _ LLR Med Drv This is the media drive roller for FB500. CQ114-67060 FRM,FB500,MEDIA IDLER _ _ RLLR Med Drv This is the media idler roller for FB500. CQ114-67061 FRM,FB500,FAN TRAY C _ _ BL Med Drv This is the cable assembly used in the FB500 belt vacuum table. One is used per tray with 3 trays per printer; this FRM is for qty.
1 CQ114-67062 FRM,FB500,VAC TRAY/ _ BLOWERS Med Drv This is the vacuum tray with blowers and cabling used in the FB500 belt vacuum table. There are three trays per printer; this FRM is for qty.1 CQ114-67063 FRM,FB500,MEDIA BELT _ Med Drv This is the media-drive belt for FB500. Includes various other parts required for performing the replacement. CQ114-67064 FRM,HI RES MEDIA ENC _ _ _ ODER,U Med Drv This is the read-head and cable for the high-resolution media drive encoder, located on the user-end of the media belt/vacuum table assembly. The cable is integrated to the read-head and inserts into CQ114-67170 Encoder interface connector. See also CQ114- 67066 for the encoder ring on the roller.
Common to 500-700. page 270 CQ114-67065 FRM,MEDIA MTR CPLER _ _ _ PARTS,U Med Drv This is the coupler between the media drive motor/reducer and the media drive roller. The FRM includes 8 new screws and 2 new interlock keys. Common to FB500-700. page 280