EN Function introduction File menu table: Table 5.4 File menu table Function menu descriptions: Table 5.5 Function menu descriptions Steps to save data files 1 Insert a MicroSD card or USB memory. 2 Press to enter the page. 3 Select USB flash drive or SD Card. 4 Set the time interval. Time interval options: 5 s, 30 s, 1 min, 10 min, 30 min, 60 min. 5 Press the start button, the instrument will start recording data, and the page Copyright Qingdao Hantek Electronics Co., LTD HTM200 user manual 27 Function Settings Descriptions File name - - The file name is automatically generated when the USB flash drive or SD card is inserted.
Storage device U disk SD card When inserting a USB flash drive or SD card, select the corresponding storage device. The SD card storage function is optional. Time interval 10 s 30 s 1 min 10 min 30 min 60 min Set the interval for saving temperature data to a USB flash drive or SD card. 4G interval 10 s 30 s 1 min 10 min 30 min 60 min Set the interval for uploading temperature data to the network. Menu item Descriptions Edit Edit the parameters of selected items. Start Start saving data, and automatically enter the page. Upload Hold down the soft button for 3 seconds to enable the 4G network transmission function.
After the network transmission function is enabled, all other buttons are disabled except the power button and the alarm button . Hold down the Return soft button for 3 seconds to disable the network transmission function. Return Exit the page and return to the page.