Print cartridge door 1 Remove the left side cover (see “Left side cover” on page 81). 2 Remove the back cover (see “Back cover” on page 82). 3 Remove the right side cover (see “Right side cover” on page 84). 4 Remove the top cover (see “Top cover” on page 87). 5 Remove the control panel assembly (see “Control panel assembly” on page 88). 6 Remove the front cover (see “Front cover assembly” on page 89). 7 Open the print cartridge door. 8 At the right side, press the two small tabs (callout 1) on the inside of the connecting link to release it. 9 Repeat on the left side. Note After the print cartridge door is removed, it is easy to remove the two connecting links. 1 Figure 34.
Removing the print cartridge door (1 of 2) ENWW Covers 91