Configuring Explicit Tracking of Receivers to Track Host Behavior The explicit tracking feature allows a switch to track the behavior of the hosts within its IPv6 network and enables the fast leave mechanism to be used with MLD version 2 host reports. To configuring explicit tracking of receivers to track host behavior, perform this procedure: Procedure Implementing IPv6 Multicast Configuring Explicit Tracking of Receivers to Track Host Behavior Command or Action Purpose 1/0/1 Step 4 ipv6 mld limit number [except]access-list Example: Device(config-if)# ipv6 mld limit 100 Limits the number of MLD states on a per-interface basis.
Step 5 copy running-config startup-config (Optional) Save your entries in the configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enter global configuration mode. Step 3 interface type number Example: Device(config)# interface GigabitEthernet 1/0/1 Specifies an interface type and number, and places the switch in interface configuration mode. Step 4 ipv6 mld explicit-tracking access-list-name Example: Device(config-if)# ipv6 mld explicit-tracking list1 Enables explicit tracking of hosts.
Step 5 copy running-config startup-config (Optional) Save your entries in the configuration file. Implementing IPv6 Multicast 13