Using MFIB in IPv6 Multicast Multicast forwarding is automatically enabled when IPv6 multicast routing is enabled. Verifying MFIB Operation in IPv6 Multicast To verify MFIB operation in IPv6 multicast Procedure Implementing IPv6 Multicast Using MFIB in IPv6 Multicast Command or Action Purpose Device(config-if)# show ipv6 rpf 2001::1:1:2 Step 8 copy running-config startup-config (Optional) Save your entries in the configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted.
Step 2 show ipv6 mfib [ | verbose | group-address-name | ipv6-prefix / prefix-length | source-address-name | count | interface | status | summary] Example: Device# show ipv6 mfib Displays the forwarding entries and interfaces in the IPv6 MFIB. Step 3 show ipv6 mfib [all | linkscope | group-name | group-address [source-name | source-address]] count Example: Device# show ipv6 mfib ff07::1 Displays the contents of the IPv6 multicast routing table. Step 4 show ipv6 mfib interface Example: Device# show ipv6 mfib interface Displays information about IPv6 multicast-enabled interfaces and their forwarding status. Step 5 show ipv6 mfib status Example:
Displays general MFIB configuration and operational status. Implementing IPv6 Multicast 30