Installation and connection en Niche width An inside niche width of at least 600 mm is required for the appli- ance. 2. Insert the mains plug of the appli- ance's power cable in a socket nearby. The connection data of the appli- ance can be found on the rating plate. → "Appliance", Fig. 1 / 3 , Page 13 3. Check the mains plug is inserted Over-and-under and side-by-side installation If you want to install 2 refrigerating appliances one over the other or side by side, you must maintain a clear- ance of at least 150 mm between the appliances. Selected appliances can be installed without a minimum clear- ance. Ask your dealer or kitchen planner about this. properly.
a The appliance is now ready for use. 4.3 Installing the appliance WARNING Risk of electric shock! Liquid in the control elements may be dangerous. ▶ Always install the enclosed niche cover in accordance with the en- closed installation instructions. ▶ Install the appliance in accordance with the enclosed installation in- structions. 4.4 Preparing the appliance for the first time 1. Remove the informative material. 2. Remove the protective foil and transit bolts, e.g. remove the ad- hesive strips and carton. 3. Clean the appliance for the first time. → Page 22 4.5 Connecting the appliance to the electricity supply 1.
Insert the non-heating appliance plug of the power cable into the appliance. 11